Layer die (with foam side up),
then fabric and cutting mat.
TIP: You can cut two 6" wide dies
side by side at the same time.
Press green power button to
turn on cutter. Push die, fabric,
and mat firmly against roller.
The pieces will automatically
move through cutter.
Remove mat and perfectly cut shapes!
Repeat process. Press Power button
to turn off cuttern when finished.
Starter Set Includes:
Features and Benefits:
GO! Fabric Chart: Chart below is the recommend number of fabric layers; actual number of fabric layers will vary depending on fabric type and thickness.
|Cotton with Fusible Web||4|
Care & Maintenance: For best results, always keep your GO! Big Electric Fabric Cutter clean and lint free. To clean the fabric cutter inside and out, use a soft dry cloth. Avoid abrasives, solvents and spray cleaners. If necessary, wipe with a damp cloth, then polish with a dry cloth. Use canned air to clear lint from roller area. The GO! Big Electric Fabric Cutter does not have replacement parts.
Warranty: We promise your personal AccuQuilt GO! Big Electric Fabric Cutter will be free from defects in material or workmanship when used as directed with our limited one-year warranty. If you experience a manufacturing defect within one year after purchase, AccuQuilt will repair or replace the cutter at no charge. Improper use, excessive wear and tear caused by commercial use and/or damage caused by the user will void the warranty. This warranty covers only the cutting unit--not mats or dies. To receive a replacement unit, return the cutter to the place you purchased it.